Basic Info.
Feature
Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Item
Clay Fly Ash Mud Soil Brick Belt Conveyor
Supply Material
Clay, Fly Ash, Mud, Soil
The Biggest Angle Upward Transport Angle
18o
The Biggest Angle Downward Transport
15o
Transmission Device
Motor, Reducer, Coupling, and Roller Actively
Brake Rigging
Non-Return Device, Brake
Belt Material
Rubber, Nylon, Polyester Fiber
Roller
Buffer Roller and Self-Aligning Roller
The Composition of Belt Conveyor
Belt, Roller, Frame, Driving and Tension Device
Transport Package
Conveyor Roller by Boxes, Frame by Container
Specification
ISO9001, SGS, TUV, BV
Product Description
Ibrick Large capacity clay fly ash mud soil brick belt conveyor
Ibrick supply fully automatic brick making machine and brick making equipment
Ibrick provide clay brick tunnel kiln, brick dryer chamber, brick hoffman kiln of technical design and technical supporting
Clay brick belt conveyor for clay brick raw material transportation
Belt conveyor use tape or strap and traction mechanism and bearing mechanism of a continuous motion type transport equipment.
The characteristics of the belt conveyor:
Advantages:
A large transport capacity, small working resistance, low power consumption,
Long transport distance, long service life, and for coal
The crushing effect of small, low noise, safe and reliable.
Disadvantages:
The fuselage is high, is not convenient to load, should not have edges and corners
The goods, can't bend.
Scope of application of belt conveyor:
Scraper conveyor can be used to transport, can also be used to tilt.
When inclined transportation, its Angle is as follows:
18 DHS upward transport: the biggest Angle
15 DHS downward transport: the biggest Angle
Double as shearer track of scraper conveyor, when working face Angle in more than 10 DHS, anti-skid measures should be taken.
The main types of belt conveyor
1. According to the strength of the conveyor belt is different, divided into general and powerful.
2. According to the transmission function is different, divided into transfer type, telescopic and stationary.
3. According to the installation in a different way, divided into the floor type, hanging type and combined type.
4. According to the drawing method is different, divided into drum drive type and wire rope traction type
The composition of belt conveyor are:
Mainly by the adhesive tape (belt), roller and the frame, driving device, tension device, storage device and cleaning device, etc.
Roller and rack:
1. The roller
Roller is the function of bearing belt, reduce the running resistance, and make the tape sag does not exceed the prescribed limits, ensure smooth running of the tape.
Basic requirements are: use reliable, steering resistance is small, low manufacturing cost, roller surface is smooth, small radial runout, the service life of not less than 15000 h
1) the classification of roller
Roller bearing roller can be divided into according to the use and the roller.
(1) the carrying idler
Bearing roller including branch roller and the lower branches on the roller, the roller and the roller.
(2) the roller
Including buffer roller and self-aligning roller
Adjusting process: when the belt running deviation occurs, run into vertical stick, stick turns rotary frame, make the tape inwards, and trough peace shape roller swinging, then make the running deviation of adhesive tape was corrected.
The belt conveyor, common fault analysis and processing
1. The main reason for the fire accident
(1) the use of flame retardant conveyor belt or unqualified fire belt.
(2) overload pressure belt conveyor belt or as conveyor belt running deviation, and part of roller turn makes conveyor belt skid.
(3) hydraulic coupler using unqualified fusible plug and combustible medium.
(4) the high-speed rotating machinery, conveyor belt for a long time and pulverized coal, coal gangue, such as wood, cable, pipeline friction on fire.
2. The main reason for the status
1) tape resistance is too large.
Precautions: device to control, no overload operation, etc.
(2) the belt tension is not enough.
Precaution: check the tension of the conveyor belt, moderate taut conveyor belt.
(3) the coefficient of friction between belt and driving roller, Jane.
Precaution: to take effective measures of water spray water;Ensure cleaning device, anti-slip device and reliable operation.
3. The phenomenon and the reason of deviation of conveyor belt running
F tape at some point along the conveyor start to run partial side.
1) rollers binding material, which leads to the roller surface uneven;
(2) tape product coal is overmuch, the side of the tape to;
(3) of floor heave of roadway deformation and the bracket is not straight, roller deflection.
Precaution: can remove binding material, coal slurry to eliminate running deviation.
F the whole tape to run partial side.
Reason: roller not parallel or joint is not straight.
Preventive measures:
1) can be running on one side of the partial slant range with a number of vertical stick, to reset the conveyor belt;
(2) correction with the center line of the conveyor belt conveyor belt joint verticality, to eliminate the wandering.
F light load without wandering, wandering when overloaded.
Reason: load the malposition, eccentric load and the side of the tape, the adhesive tape on both sides of the running deviation caused by load vary widely.
Precaution: adjustable feed weight and position to get rid of wandering.
Direction of rubber belt run-out in F, twitched.
Reason: tape relaxation.
Precaution: can adjust tension device to eliminate running deviation.
F tape uninstall running deviation.
Reason: uninstall the tightness on both sides of the baffle contact with tape running deviation caused by different.
Precautions: adjustable damper and tightness of tape to eliminate running deviation.
DS belt conveyor technical datas:
| Specification Model | Capacity (m/s) | Power Requirement (kw) | Triangle Strap(mm) | Exterior Dimension (mm) |
| DS50-10M | 0.8 | Y4-3 | 3B-2850 | 10000×810×370 |
| DS60-10M | 0.8 | Y4-3 | 3B-2850 | 10000×910×380 |
| TD650-10M | | Y4-4 | / | 10000×960×370 |
We supply following brick making machine and brick making equipment
1. Belt type box feeder, plate type box feeder
2. Primary roller crusher, fine high speed rolling crusher, jaw crusher , hammer crusher
3. Double shaft mixer , double shaft mixer and extruder
4. Energy saving vacuum extruder, double shaft vacuum extruder
5. Automatic brick cutter system
6. Green bricks separation machine
7. Belt conveyor
8. Brick dryer
9. Brick tunnel kiln
10. Kiln automatic control and monitoring system
11. Brick kiln equipment
12. Automatic brick loading and unloading machine
13. Automatic brick packaging machine
14. Automatic robot brick setting machine
15. Automatic brick stacking machine
16. Brick dryer and tunnel kiln design and construction
17. Technical provide and technical supervision
18. Undertake turn-key project
Ibrick Large capacity clay fly ash mud soil brick belt conveyor
If you want to set up a new brick plant or plan to purchase automatic brick making machinery and brick equipment, please contact with us at any time .
Welcome to contact with us online :
Facebook id : Ibrick China
Phone Number: 0086-15991710216
){kind=link}